Woodspecies Face-layer:  MERBAU, WHITE OAK, HEVEA

Classification/Grading:        A GRADE

Formaldehyde Emissions:    Class: E1

Core species:                       DAMAR/PINE/MERANTI/MILL’S OPTION

Finishing :                             UV cured acrylic lacquer

Laying system:                     Glue system

Dimensions:                          14 X 195 X 2,200 MM

                                             14 X 140 X 1,820 MM

                                             14 X 220 X 1,820 MM

                                             14 X 300 X 1,820 MM

Backing species:                  MERANTI

Glue bond:                            UF.E1-class

Edge Treatment:                   Squared edges

Selected Parameters  and acceptable standard & requirements

Colour,pattern & finishing:       According to approved standard specimen or samples

                                                 No significant difference

Classification/Grading:            All used timber for prefabricated parquet must be sound & free from

                                                 mould, decay or rot is defined as  decomposition of wood by fungi

                                                 or other micro-organisms resulting in softening, progressive loss of

                                                 strength , mass and often a change  of texture and colour .

Moisture Content                      8 % (+/- 2%) at the time of shipment from the manufacturing mill

Assembling T&G                     The connecting of T & G should be easy and well fit by handforce.

                                                Tolerances:  Height differences between elements :  ≤  0.10 mm

                                                Length: +/- 0.1% . r Width : +/- 0.1 mm

                                                Thickness Face-layer : +/- 0.2 mm

                                                Total thickness: +/- 0.2 mm

                                                Parallel on the width : Individual differences  ≤ 0.2mm

                                                Edge straightness : ≤ 0.2mm/L   r End angle  : ≤ 0.1mm/W

                                                Cupping :  ≤ 0.2mm/W   r Bow :  0.5%mm/L

Finishing.(lab.test)                 The type of coating must conform with that agreed in the coating data.

                                               Coverage must be consistent and extend over all visible surfaces.

                                               The coating coverage shall be free from defects

                                               Gloss level of lacquered surface should be 35° (Tol. + 5°) Semi gloss

                                               Gloss level of oiled surface should be 9°(+/-3°) silk matt